The Energy Savings Opportunity Scheme, or ESOS, is the latest European Union scheme aimed at increasing energy efficiency to mitigate climate change and simultaneously boost business profits. Estimates by the Carbon Trust indicate that many organisations can reduce their annual energy costs by 20% through energy efficiency measures and improved energy management.
The ESOS policy was established by Article 8 (4) of the European Union’s 2012 Energy Efficiency Directive. It is implemented in the UK by the Energy Savings Opportunity Scheme Regulations 2014.
Who is Affected?
The scheme will operate in a series of four yearly cycles. The qualification date for the first phase was the 31 December 2014. Participation is mandatory for any organisation which met the ESOS definition of a ‘large undertaking’ on the qualifying date, i.e. if it had:
- At least 250 employees; or
- An annual turnover in excess of €50 million and an annual balance sheet in excess of €43 million; or
- Is part of a corporate group which includes a UK undertaking which meets one of the criteria above.
Next Steps for Affected Organisations
The Environment Agency (EA) is responsible for administering the scheme. Participating organisations don’t need to advise the EA that they are taking part. However, they do need to inform the EA that they have complied with the scheme’s requirements by the 5 December 2015 and every four years thereafter.
At the heart of the scheme is the ESOS Assessment. This must cover all UK operations over a 12 month period which includes the 31 December 2014. It must also include the following six key steps:
Step 1: Appoint a ‘lead assessor’ to conduct or oversee / sign off the assessment. A lead assessor may be an internal or external appointee but must be a member of an approved body. (These approved registers are listed here).
Step 2: Measure the total energy consumption for buildings, industrial process and transport.
Step 3: Identify the areas of significant energy consumption. These should account for at least 90% of the total energy consumption. The remaining 10% or less is referred to as de minimis energy use and does not need to be audited.
Step 4: Undertake an audit to identify practical Energy Savings Opportunities for areas of significant energy consumption. This should include an assessment and report on the cost-effectiveness of each recommendation (based on a life-cycle cost analysis, where practical).
Step 5: Ensure the ESOS Assessment is formally reviewed by a board-level director and approved by a Lead Energy Assessor.
Step 6: Report compliance to the Environment Agency by 5 December 2015.
There is no pre-set methodology for undertaking an ESOS Assessment. However, the Lead Energy Assessor must be satisfied that the assessment process meets the legislative requirements. The assessment must include at least one site visit to help ensure that all recommendations are practical and not just theoretical. All areas of significant energy consumption must be covered either by an ESOS Energy Audit or by an alternative route to compliance. Further impartial guidance may be found on ESOS on the government website
The results of any previous energy audits within the qualifying period do not need to be repeated provided they are of an appropriate standard. ISO 50001 certification, for example, may meet the full or partial requirements of an ESOS Energy Audit. Display Energy Certificates (DECs) and the accompanying advisory reports, Green Deal Assessments or other existing audits may also partially meet the scheme’s requirements.
There is also no requirement for organisations to implement any of the Energy Savings Opportunities identified during the auditing process. However, it is anticipated that the associated financial savings will actively encourage this process.
If you need assistance with the Energy Savings Opportunity Scheme (ESOS) find out more from our Chartered Environmentalist.